Application HUELVA PLASTICS was responsible for the supply, installation and structural support of plastic pipe systems in the context of the proposed expansion of a copper and polymetallic production plant for mining operations in Stained Water. Characteristics The installation amounted to approximately 2100 meters of pipe, ranging from Ø90 to Ø350 in diameter, and the …
Ver »
Application Construction of rectangular FRP ductwork as part of the flue gas desulphurization system in an 80 MW steam turbine. This ducting system replaced the existing metallic system that had been degraded by corrosion. Characteristics The ducts had a rectangular cross section with interior dimensions of 4470x1870mm. Its function is to connect the air preheater …
Ver »
Application The manufacture, assembly and testing of two separate fire protection rings installed in the combined cycle power plants at Port de Barcelona (owned by Gas Natural) and Besós V (owned by Endesa). Characteristics These underground installations have a principal diameter of Ø315, and a total length of approximately1800m each. The templates for the manholes …
Ver »
Application Manufacture of sections pf pipework in PE100 for the installation of syphons under the new Madrid-Lisbon AVE line. Characteristics Five syphons were constructed to carry irrigation water from one side of the line to the other, consisting of PE piping inside a concrete sleeve. The diameters used were Ø1400, Ø1200 and Ø710 in a …
Ver »
Application In this project an existing cooling system in A°C° material at the Melilla diesel plant was replaced with a new system in GRP and PE100 materials. Characteristics Construction of a complete cooling system (supply and return), consisting of two lines of diameter DN700 (FRP system) and DN800 (PE100 system). The FRP material was used …
Ver »
Application Construction of an absorber and associated feed system in FRP material for a desulphurization plant for a coal-fired power station. Characteristics The principal diameter of the pipes was DN1200. Plastics Huelva was responsible for the installation of the feeder pipes to the absorber, and of the distribution ramps in its interior. Operating Conditions The …
Ver »